Iron remover manufacturers share how to correctly choose iron remover

Iron removers are safety devices designed to prevent accidental iron from entering working machinery (especially crushers) along with the material or ore being treated. Therefore, the iron remover can prevent accidents or forced stoppage in mechanical work due to the entry of iron. The application of iron remover is very wide, and the next iron remover manufacturer teaches you how to choose iron remover.
1, the correct selection of iron remover must also consider the iron content of the material, iron removal requirements, the use of the environment and the characteristics of the iron remover itself.
2, when the material contains more iron, should be selected with continuous iron discharge capacity of self-discharging electromagnetic, permanent magnet iron remover.
3, when the material contains less iron, it is appropriate to choose manual iron unloading type electromagnetic permanent magnet iron remover. Proper lowering of the suspension height is conducive to iron removal.
4, when the material contains few iron parts, GJT series metal detector and strong excitation dump type electromagnetic iron remover should be used together, saving electricity and energy, good iron removal effect.
5, when the power capacity is limited, it is appropriate to choose permanent magnet iron remover.
6, when the use of environmental dust is more serious, should choose a fully closed structure of the iron remover.
7. When the iron remover is installed at the head of the belt conveyor, the material is conducive to iron removal due to its forward impulse and loose shape, but the driving wheel at the bottom of the iron remover should be a non-ferromagnetic material.
8. When the iron remover is installed in the middle of the belt conveyor (that is, cross arrangement), in order to improve the iron removal effect, WCG series non-magnetic linear support wheels can be added under the tape.
9, for the non-ferromagnetic metal materials that can not be absorbed by the iron separator, it is appropriate to use the GJT series metal detector to detect, alarm, and manually pick up after shutdown.
10, in addition to iron suction iron has the following characteristics: large long easy to small short; Prone to sucking; Suctive and prone to quiet. In the case of higher requirements for iron removal, the specifications of the iron remover should be appropriately improved or multi-stage iron removal should be adopted.
11. When multistage iron removal is used, the iron removal suction of the post-stage should be higher than the iron removal suction of the former stage, otherwise, the iron removal effect of the post-stage iron remover is poor.