Describes the principle of pipe iron remover and installation precautions

Pipe iron remover is a device used to remove iron impurities in water, the principle is to use magnetic force to adsorb iron ions on the surface of the equipment, so as to achieve water purification. When installing the pipe iron remover, the pipe iron remover manufacturer introduces some precautions that need to be considered to ensure the normal operation and use of the equipment.
The principle of pipe iron remover is mainly to remove iron impurities in water by using the action of magnetic field. When the water flows through the magnetic tank, the iron ions in the water will be adsorbed by the magnetic force and will be removed from the water. Specifically, there is a magnetic source inside the pipe iron remover, which creates a magnetic field that can change the iron ions in the water, so that their mass increases and precipitates. At the same time, the surface of the pipe iron remover has a layer of magnetic tank, which can absorb the iron ions in the water, so that it can not be further dissolved into the water. In this way, the pipe iron remover can effectively remove iron impurities from the water and improve the water quality.

When installing the pipe iron remover, you first need to select a suitable installation location. In general, the pipe iron remover should be installed in a place with a large water flow to ensure that the equipment can operate normally. At the same time, the installation location should also meet the following requirements: close to the water source, convenient maintenance and overhaul; Close to the pipe interface, easy to connect the pipe; Distance from the pump to prevent the magnetic field on the pump. In addition, it is also necessary to consider the surrounding environmental factors, such as temperature, humidity, etc., to ensure the normal operation of the equipment.
When installing pipe iron remover, pay attention to the following points. The first is the installation method, there are generally two vertical and horizontal installation methods, you can choose the appropriate way according to the actual situation. The second is the selection of pipelines, which should be selected to match the pipeline iron remover to ensure that the installation is firm and sealed. During the installation process, attention should also be paid to avoid the vibration or impact of external forces on the pipe iron remover, so as not to affect the normal operation of the equipment. In addition, the pipeline should be cleaned and vented before installation to ensure that the water quality in the pipeline is clean and will not pollute the pipeline iron remover.
When using pipe iron remover, there are also some problems to pay attention to. The first is to check and clean the equipment regularly to ensure that the magnetic slot inside the equipment is clean and free of impurities and can work normally. The second is to avoid the use of overheated water, so as not to affect the equipment. At the same time, it is necessary to carry out regular inspection and maintenance of the pipe iron remover, timely deal with equipment failures, and replace the magnetic source and magnetic slot and other wearing parts. In addition, it is also necessary to pay attention to the service life of the equipment and replace the aging or damaged equipment in time to ensure the normal operation of the equipment.
In summary, the pipe iron remover is a device that can effectively remove iron impurities in water, and its principle is to use the role of magnetic field. When installing a pipe iron remover, select an appropriate installation position and pay attention to the installation method and pipe selection. When using, it is necessary to regularly check the equipment and clean the magnetic tank, avoid the use of overheating water, and maintain and replace the equipment in time. Only in this way can we ensure the normal operation of the pipe iron remover and improve the water quality.